Installation Sheet

1/2

ASSEMBLY INSTRUCTION

Item#: 3005-75005 Refectory Base-Dune

3005-75006 Refectory top-Drift

***Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more people.

HARDWARE LIST

LOCK WASHER

69*27.2*4mm ALLEN WRENCH

73*29*5mm ALLEN WRENCH

Q'TY

50mm BOLT

FLAT WASHER

1. Place the top (A) upside down on a soft surface;

2. Attach the pedestal (B) to the top (A), align holes

on the pedestal and the top ,insert 1pc bolt (E) with

1pc lock washer (F) and 1pc flat washer (G) into

each hole; Don’t tighten them right now.(See

diagram 1)

3. Attach the other pedestal in the same way as step

4. Place stretcher(C) onto two pedestals (B);

5. Insert 1pc bolt (E) with lock washer (F) and flat

washer (G) into holes in rail (C) and corresponding

holes in pedestal (B); (see diagram 2)

6. Tighten the bolts attached to stretcher(C) first with

allen wrench（D）.

7. Secure the bolts (E) attached to table top with

allen wrench (D);

8. Turn the table upright.

Diagram 1

Diagram 2

PAGE 1
ASSEMBLY INSTRUCTION Item#: 3005-75005 Refectory Base-Dune 3005-75006 Refectory top-Drift ***Please make sure you have all parts indicated below prior to assembly. This unit is heavy and can best be assembled with the help of two or more people. NO D E F G H HARDWARE LIST Q'TY 73*29*5mm ALLEN WRENCH 1 50mm BOLT 12 LOCK WASHER 12 FLAT WASHER 12 69*27.2*4mm ALLEN WRENCH 1 1. Place the top (A) upside down on a soft surface; 2.
PAGE 2
Instruction for the leaves: A Diagram 3 B 1. Pull out the leaves as the arrow direction shown in diagram 3. C 2. Lift the leaves up and make them 1/2” higher than the center top.(See diagram 4) A B 3. Push and lay down the leaves as shown in diagram 5. C Diagram 4 4. There is a latch under both sides of the leaf, unscrew the button by hand a little and push it to the bottom of top, screw the button tightly. A B C 5.