QUICK INSTALLATION GUIDE R102FG
Conventions Thank you for purchasing R102FG . Application to 4G wireless router,this installation guide provides a Web-based configuration guide method and procedure. In this guide, Windows 10 is used as an example.
interface Interface Description Functional description DC power input interface power supply Battery version Power interface Network port DCIN battery-less version WAN LAN1/LAN2 2*2.4G Wi-Fi antennas Built-in antenna 2*5.
In thundderstorm weather,pl w lease rem move the power suupply andd all conn nections of the equipm ment to avvoid damaage by lighhtning.
Device Configuration instructions If you need to manage and configure this device, you can connect to the 4G LTE CPE wireless or by wire. The default 4G LTE CPE address of this device is 192.168.169.1 and the sub-net mask is 255.255.255.0. These network parameters can be modified according to the actual situation, which will be explained with default values.
/LTE-5GHz-××××××”,and thhe Wi-Fi factory paassword is s7wks68q. Users can c also directly d conneect the LA AN port of o the R1102FG CPE dev vice to thhe computter networrk port using u a netwoork cable. 1 Open thhe IE of thhe computter or smaart-phone/ttablet, typpe the adddress bar:192.168.1669.1 in 1. the adddress bar,,and press Enter. 2 In the pop-up login winndow,enterr the password :addmin;thenn click ”L 2. Login”(orr enter passw word and press p Enterr directly to t enter).
Se et up 3G/4G Intern I et T routerr supportss the functtion of automatically This y configurring 3G/4G G dialing parameterrs. It can bee automatiically configured foor more thaan 95% off global opperators' 33G/4G nettwork dialing param meters withhout manuual configuuration byy users.
3G/4G G ISP, andd click OK K. Wo orking Mode e Settin ng T The R1022FG suupports five f Interrnet accesss modess:DHCP (Dynamic ( c Host Configguration Protocol)IInternet, Wired Brridge, STA TATIC(Stattic Host Configuraation Protocol), PPPO OE(point-too-point Prrotocol Ovver Ethernnet), Wireless 2.4G master, Wiireless 5G master,4G G LTE. The default d extternal netw work connnection mode m is "w wireless 2.44GHz acccess".
acquissition), PP PPOE dialling, and static IP Internet I access threee ways. W Will act as a a wireleess (or wired)) access point, bridgge to yourr local netw work and connect too the Interrnet throug gh a router. (N Network map m settin ngs link diaagram) 3 3G/4G M Mode T defaullt mode off the wirelless routerr is "4G LT The TE Interneet access". Insert thee SIM carrd and use thhe 4G moddule to acccess the Innternet. Alll LAN porrts are avaailable.
W Wireles s 2.4GH Hz Settiing In the defaault mode of R102FG Pro start-uup, the useer can clickk on the ""Bar Wireless W 2.44GHz" s t then click the "SSID D" blank bar to in thee navigatioon bar to enter the wireless network settings, changge the settiing WIFI name, n clicck the "Passsword" blank b bar can c modify fy the WIF FI passworrd.
C Click the system s barr "System -> Restarrt" to restaart the systtem or restart the deevice. F Firmwa are upgrrade U Users can click the "System " Restore/F Flash Firm mware" in the navigation bar to t enter thhe flash new n firmw ware imagge settings,, with softtware upgrrades, youu can loadd the latestt version of o the softwaare to the router forr more funnctionality and moree stable peerformancee Steps as below: (a) Save thhe upgradee file to loocal compuuter.
FCC Compliance Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
ISEDC Radiation Exposure Statement: This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. IC exposition aux radiations: Cet équipement est conforme avec ISEDC les limites d'exposition aux rayonnements définies pour un contrôlé environnement. Cet émetteur ne doit pas être co‐localisés ou fonctionner en conjonction avec une autre antenne ou émetteur.
