System Instruction

TO SET THE CLOCK TIME
In Standby offmode.
1. Press and hold the CLOCK/SLEEPBUTTON on the unit or CLOCK BUTTON on
the remote, the digit 24H or 12H willblink on the display, then press SKIP+ /
SKIP- button to desired 24H / 12H, and press the CLOCK/SLEEPBUTTON on
the unit or CLOCK BUTTON on the remote to confirm
2. Then press the SKIP+ / SKIP-Button to set the desired HOUR,
3. Then press theCLOCK/SLEEPBUTTON on the unit or CLOCK BUTTON on the
remoteagain, the MINUTE will blink.
4. Press the SKIP+ / SKIP-Button to set desired MINUTE.
5. Press the CLOCK/SLEEPBUTTON on the unit or CLOCK BUTTON on the
remote to confirm
TO adjust the volume
Rotate the volume control knob clockwise Or press the vol + button on remote control to increase the volume.
Rotate the volume control knob anti-clockwise Or press the vol - button on remote control to decrease the
volume.
Check the display to confirm the volume setting.
Mute function
Press the mute button on remote control to mute the volume. Press it again to cancel the mute function.
RADIO OPERATION
1. Press the STANDBY buttonon the unit then press the FUNCTION button
repeatedly, until the frequency shown on the display
OR, press the STANDBY button on the remote to turn on the unit, then press the
FUNCTION button on the remote until the frequency shown on the display
How to use the buttons for radio
 Manual Tuning
Press the SKIP+ / SKIP- button to search for desired frequency.
 Automatic Tuning
i) Press and hold the SKIP+ / SKIP- button until the display frequency starts
run.
ii) When a station of sufficient strength has been found Tuning will stop or
you can stop the automatic tuning by pressingSKIP+ / SKIP- button.
2.
To switch off the radio, press the STANDBY button on the remote once OR press
the STANDBY button on the unit, until the normal time shown on the display