User's Manual

through appointed communication interface. This mode is only for reading to the tag operation.
2 ． 4 ． 3overwrite working((TRIGGER READ when the touching off port inputs low
voltage, ,reader begins to read card in cycle ,and shut off in a period of time.
2．5．Interfacing identification:
Interfacing identification is designed for reducing the prolixity of the data that reader uploads. If
choosing the function ,reader will only upload a set of data when reader reads the same card in
multi-connection. Namely that if the interval time of interfacing reading two time exceeds the
effective time,reader won’t process interfacing identification. So users should choose it according
special demand..
3．The fitting of HKRUR-3083 reader
Our company provide Config exe programs for the fitting of the working parameter of the
reader ,the parameter fitting program is like the following picture
5 fitting software interface
3．1 COM setting
Interface setting includes interface choice, band rate setting and address choice of reader. The
address of reader is from 1to 240.Only choosing the right address, can reader establishes
communication. Besides,, you can choose ¡°defaut¡±, which is fit for all reader, after clicking
¡°Connect¡±button ,PC and reader establish communication connecting.
After software and reader connecting, ,it reads the present working parameter of reader at once
automatically .Interface after connecting is like the following picture indicated: