User's Manual

carriage drive.
5. The demo program instruction pf HKRUR-3083
The demo program of the reader provides the contend of all kinds of operation to the tag and
parameter setting of radio frequency Users can evaluate the function of the function of the reader
through this demo program, of consider to make the second exploitation of the reader.
The demo program of the reader includes ¡±DEMO exe¡± and ¡°MR915ApiV10.dll¡±Please put this
two parts in the same file catalog ,then double click ,it will begin to circulate ,the interface is like
the following picture indicated.
Demo software interface
Choose the COM communication port and baud rate you use, and choose the right reader address.
Click ¡±Connect¡± to establish connection with the reader .After successful connection, the right and
left information frames will indicate the successful connection and the edition NO. of the reader
firmware. And you can operate all demos
Sixth :the second exploitation of HKRUR-3083
Users can make the second exploitation to the application software reader according to the
need. .We provide the exploitation bag basis on the C language ,which supports the environment
of VC++,vb, Dephi and C+Buider and so on .Please make reference to the <<NRreader SDK
instruction>>about the use of exploitation tag.