User's Manual

HKRUR-3083Reader HKRUR-3083 Reader
Frank fitting like the figure 1 crutch fitting like the letterL
The fitting modes of the reader
4．2 the fixation and height adjustment of the reader
When frank fitting ,it demands that the crutch dia.of the reader 50 to 60mm while length2.2m
Using stain steel material that more than 1.3m thick is the best choice. Fix the reader to the top of
the crutch with the self-provided fastening pin in the casing of HKRUR-3083 reader .Adjust the
height from the center of HKRUR-3083 reader to the level of carriage way, according to the
vehicle style(mainly indicates the oversize vehicle and landauter), generally about 2.0m(from
1.2m to 2.2m)
When crutch top fitting like the shape of letter L,it demands the dia. of L shape (or dragon-door
shape) crutch is from 60 to 80mm,while rail dia.60 to 60mm.It is best to sue stain steel material
that more than 12 to 20mm thick. Fix the HKRUR-3083 reader to the rail that near the middle
carriage drive. The height that the rail to the ground is needed to adjust from 3.5m to
4.0m,according to the height of vehicle
the azimuth adjustment of the reader
The sketch map of the azimuth angle adjustment of HKRUR-3083reader
Antenna angular:indicates the included angle between the antenna and level when the antenna
inclines to the ground.
azimuth angle of antenna:indicates the deviation angle when antenna deflects to the direction of
MR6021A
reader
MR6021A
railing
Pillar