Quick Start Guide PRO-BOOK 10.1 10.1’’ Windows 2-in-1 tablat Follow the easy steps shown inside to get your Trio Tablet up and running.
STEP 1:CHECK OUT THE CONTROLS Before you do anything else,take a good look around your Trio Tablet and find out where all the control buttons and other items of interest are. Step 2: CHARGE THE BATTERY You need to charge up the battery before you use your TRIO tablet for the first time. Connect the charger to your TRIO, using the USB/Charger cable.The cable plugs in to the USB/Charger Port at the bottom of your Tablet.
The connection should look like this: Plug the charger into a power outlet.The screen will display a flashing battery symbol for a few seconds to show that the battery is charging.Keep the battery on charge for 6 to 8 hours to make sure that it is fully charged. STEP 3: POWER UP When the battery is fully charged,switch on your TRIO Tablet.To do this,press and hold the power on/off button until the Trio:) logo appears: Proceed through the initial setup steps and login screen.
Wi-Fi CONNECTION Before creating the Wi-Fi connection, please ensure that your WLAN network has been configured correctly. Step 1: Tap to select Wi-Fi item and switch it to ON. The unit will scan the available networks automatically. Step 2: Tap the desired network, and input the password if necessary.Then tap Connect. Bluetooth CONNECTION You can also connect to other device through Bluetooth. Step 1. Add a Bluetooth device in your unit and activate this function. Step 2.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
