User's Manual

8
To unlock your screen, press and hold the minus
button (-) until the screen displays a lock unlocking.
Charging
To charge your player, simply connect the device to a
powered USB port on your computer, or an AC
adapter with an output of 5V and 1Amp.
Inserting and removing the Micro SD card
Inserting: Ensure that the player is powered off, and
disconnected from the computer. Hold the Micro SD
card face up (side with words aligned in the opposite
direction of the display screen), and slide the card into
the socket on the player, slightly past flush. When you
hear the card click into place, you can access the card.
Removing: Ensure that the player is powered off, and
push the SD card just past flush. When you hear the
click, release pressure, and the card will slide out.
Caution: Please ensure that the power is off when
you connect or disconnect your SD card, or damage
may occur to the player or your card.