Installation Guide

ManualsBrandsHONG KONG KONING INDUSTRIAL ManualsComputers & AccessoriesIndustrial Cellular Signal Booster

Table Of Contents

1 / 16 HONG KONG KONING INDUSTRIAL LIMITED

Tel:0086-755-2906 9062

E-mail:rick@wisdomfer.com

W100 INSTALLATION GUIDE

Content

1. Signal Booster Improves Cellular Signals ................................................................................................................. 2

2. Signal Booster Package ................................................................................................................................................... 4

1) KITS list and function ...................................................................................................................................................... 4

2) Signal Booster W100 Series Datasheet ..................................................................................................................... 5

3. Installation .............................................................................................................................................................................. 7

1) Donor Antenna Installation ........................................................................................................................................... 7

2) Donor Antenna Installation Figure ............................................................................................................................. 8

3) Signal Booster Oscillation Avoidance ........................................................................................................................ 9

4) Installing Lightning Protection ................................................................................................................................... 10

5) Running Outside Antenna Cable .............................................................................................................................. 10

6) Installing the Inside Panel Antenna(s) ..................................................................................................................... 11

7) Installing the Signal Booster ....................................................................................................................................... 11

8) Check the System Connection Correctly ................................................................................................................ 12

4. Post Install Setup .............................................................................................................................................................. 13

1) Install APP ......................................................................................................................................................................... 13

2) APP Interface Guide ...................................................................................................................................................... 14

3) Use APP to set and adjust signal booster .............................................................................................................. 16

W100 Industrial Cellular Signal Booster

INSTALLATION GUIDE

Summary of content (16 pages)

PAGE 1
W100 INSTALLATION GUIDE W100 Industrial Cellular Signal Booster INSTALLATION GUIDE Content 1. Signal Booster Improves Cellular Signals ................................................................................................................. 2 2. Signal Booster Package ................................................................................................................................................... 4 1) KITS list and function .......................................................
PAGE 2
W100 INSTALLATION GUIDE 1. Signal Booster Improves Cellular Signals In our real life, we practice to install signal booster to eliminate the problems that UE can’t receive signal from cell tower as construction material or other blocks. As figure show: we install one donor antenna at a location outside of the home or building where the strongest cell signal is present. The donor antenna receives and sends that weak signal via coax cable to a signal booster located indoors.
PAGE 3
W100 INSTALLATION GUIDE FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
PAGE 4
W100 INSTALLATION GUIDE ꙬWarning:Device cannot support home/personal use 2. Signal Booster Package 1) KITS list and function Picture Description Function Be installed in outside, receive signal from cell tower Donor antenna Coax cable Connect booster with antenna or splitter, combiner and allow them to transmit with low loss Jumper Signal booster Amplify the uplink and downlink signal from UE and cell tower Panel sever antenna Mounted in ceiling or wall.
PAGE 5
W100 INSTALLATION GUIDE ꙬWarning: Any product modifications that use unauthorized antennas, cables, and/or coupling devices are prohibited by the FCC. Contact FCC for details: 1-888-CALL-FCC. Changes or modifications not expressly approved by HONG KONG KONING INDUSTRIAL LIMITED could void the user’s authority to operate the equipment. Use only the power supply provided in the package. Use of a no HONG KONG KONING INDUSTRIAL LIMITED electronics products may damage your equipment.
PAGE 6
W100 INSTALLATION GUIDE Antenna isolation Max Gain + 15dB Maximum input power, no damage -20dBm (DL) -0dBm (UL) Group Delay ≦ 1μs Intermodulation & Unwanted emission Error Vector Magnitude: Compliance 3GPP TS 25.143 Rel.10 & 3GPP TS 36 143 Rel.
PAGE 7
W100 INSTALLATION GUIDE Front view Side view RF safety warning: any antenna used with this device must be located at least 8 inches from all persons. ꙬWARNING. This is NOT a consumer device. It is designed for installation by FCC LICENSEES AND QUALIFIED INSTALLERS. You MUST have an FCC LICENESE or express consent of an FCC license to operate this device. Unauthorized use may result in significant forfeiture penalties, including in excess of $100,000 for each continuing violation.
PAGE 8
W100 INSTALLATION GUIDE floor, antenna mounted direction will influence the strength of outside signal by donor antenna ⚫ Proper aiming of the outside antenna towards the source of the cell signal is very important. Generally, outside the building signal is good, so outside antenna be mounted at veranda or open view area, facing toward cell tower ⚫ Cell tower height is at the height of 6-10 floor mostly .so under 10 floor building, try to find open view area to mount outside antenna.
PAGE 9
W100 INSTALLATION GUIDE 3) Signal Booster Oscillation Avoidance Signal booster is two-way (full duplexer) amplifier.so donor antenna and sever antenna should be adequate isolation to prevent any feedback “oscillations”. We take MIC and speaker for example to clear understanding, when we put MIC near speaker, the speaker produces sharp scream. In order to ensure signal booster work normally, the isolation between donor antenna and sever antenna is bigger 10-15dB than signal booster gain.
PAGE 10
W100 INSTALLATION GUIDE each other (for example: the coverage area is in floor1 and floor2, we should mount the donor antenna at over 4 floors. If there are no floor, you can calculate at one floor of 4 meter, try to raise the height of donor antenna. b) Horizontally distance: the distance between donor antenna and sever antenna keep over 20-30 meters, better separated by wall c) Horizontally and vertical combination: presume above two ways fail, combine them.
PAGE 11
W100 INSTALLATION GUIDE 6) Installing the Inside Panel Antenna(s) Panel antenna has certain directivity, if it is mounted in wall, preferably in the center of where the signal needs to be amplified. If sever antenna is put in ceiling, it can be only put in where in the center of coverage area. but the signal strength will be little weak and coverage area will be smaller. Sever antenna can’t “see” the location where panel antenna be mounted and have enough safety isolation distance.
PAGE 12
W100 INSTALLATION GUIDE ➢ Drill four holes on the wall using the position of you choose, fix expansion bolt in the holes ➢ Install booster on expansion bolt by screw ➢ Connect power cable to booster power port ➢ Fix booster tightly, and check out the booster working indicator lamp 8) Check the System Connection Correctly 12 / 16 HONG KONG KONING INDUSTRIAL LIMITED Tel:0086-755-2906 9062 E-mail:rick@wisdomfer.
PAGE 13
W100 INSTALLATION GUIDE 4. Post Install Setup After signal booster installation finish, we will set signal booster according to scene environment to ensure system work normally. Wisdom APP can help you to make setting and adjustment effectively after you install the APP in your smart phone. 1) Install APP The device built-in Bluetooth&WIFI module, User can connect the device with phone by Bluetooth to run our APP.
PAGE 14
W100 INSTALLATION GUIDE 2) APP Interface Guide a) Click the name of booster and enter the interface. b) Click “more detail” to know every sub-band performance 14 / 16 HONG KONG KONING INDUSTRIAL LIMITED Tel:0086-755-2906 9062 E-mail:rick@wisdomfer.
PAGE 15
W100 INSTALLATION GUIDE i. ii. Band Enable can switch off or switch on the frequency Click MGC will get “set” interface, to set up the gain of uplink or downlink. 15 / 16 HONG KONG KONING INDUSTRIAL LIMITED Tel:0086-755-2906 9062 E-mail:rick@wisdomfer.
PAGE 16
W100 INSTALLATION GUIDE 3) Use APP to set and adjust signal booster Note: Please refer to page 8 “Signal Booster Oscillation Avoidance”. CPC-2-1-05 — Zone Enhancers - Spectrum management and telecommunications http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08942.html Notice: When this device operating in the 1710-1755MHz band, the maximum antenna should be fixed height of 10 meters above ground. the maximum antenna gain should less than 9 dBi. Don't use the unauthorized antennas ,cables.