User's Manual
Table Of Contents
- 1 Basic Information
- 2 Before Use
- 3 Quick User Guide
- 4 Function Menu
- 4.1 Phonebook
- 4.2 Messages
- 4.3 Call Center
- Network selection
- Call divert: When “call divert” function is started up, you can transfer the incoming call to voice inbox or other phone number according to the scheduled “ call divert” conditions.
- Call barred: All outgoing calls, incoming calls, roaming incoming calls, international outgoing calls, roaming international outgoing calls are available.
- Call waiting: You can start up or shut down the function. When it is started up, even when you are making a call, you can also receive another income call.
- Hide ID: This function must be supported by network.
- Select line: There are two lines can be selected: line 1 and line 2. But the function just for the phone which has one SIM card and two numbers. If your phone is not the type like that, please just select line 1, because if you choose line 2, dialing will be limited.
- Flight mode: You can start up the function directly or choose when power on. It is used on flight. When flight mode is working all the functions connect with network, such as SMS, dialing back, WAP network, will be unavailable, to avoid interfering the signal of the flight you take.
- Others:
- 4.4 Settings
- 4.5 Profiles
- 4.6 Multimedia
- 4.7 Organizer
- 4.8 File manager
- 4.9 Services
- Network account
- GPRS settings
- 4.10 Time and date
- 4.11 Calendar
- 4.12 Extra
- 5 Text Input
- 6 Care and Maintenance
42
balance, incandescent lamp, fluorescent
lamp, daylight and cloud.
――Delay: You can set up the timer as: Forbidden, 3S and
10S.
――Effect: The special effect can be classified into:
normal, black and white, red, green, blue,
yellow, canvas and negative.
――Flashlight: You can select “on” or “off”.
In camera preview interface press left soft key you can
enter options menu as follows:
――Gallery: Enter into image browser list.
――Settings:
―Quality: There are three options in photo image
quality: Advanced, Common and Low.
The default mode will be “Common”.
―Banding: You can set as 50Hz or 60Hz.
―Shutter sound: You can set up the sound of shutter as:
Active or Off.
―Auto save: You can select “Active” or “Off”.
―Display parameters: You can select “Active” or “off”.
Prompt: Observe photographing related local laws and
regulations. Do not use the function in illegal way.