User's Manual
Table Of Contents
- 1 Basic Information
- 2 Before Use
- 3 Quick User Guide
- 4 Function Menu
- 4.1 Phonebook
- 4.2 Messages
- 4.3 Call Center
- Network selection
- Call divert: When “call divert” function is started up, you can transfer the incoming call to voice inbox or other phone number according to the scheduled “ call divert” conditions.
- Call barred: All outgoing calls, incoming calls, roaming incoming calls, international outgoing calls, roaming international outgoing calls are available.
- Call waiting: You can start up or shut down the function. When it is started up, even when you are making a call, you can also receive another income call.
- Hide ID: This function must be supported by network.
- Select line: There are two lines can be selected: line 1 and line 2. But the function just for the phone which has one SIM card and two numbers. If your phone is not the type like that, please just select line 1, because if you choose line 2, dialing will be limited.
- Flight mode: You can start up the function directly or choose when power on. It is used on flight. When flight mode is working all the functions connect with network, such as SMS, dialing back, WAP network, will be unavailable, to avoid interfering the signal of the flight you take.
- Others:
- 4.4 Settings
- 4.5 Profiles
- 4.6 Multimedia
- 4.7 Organizer
- 4.8 File manager
- 4.9 Services
- Network account
- GPRS settings
- 4.10 Time and date
- 4.11 Calendar
- 4.12 Extra
- 5 Text Input
- 6 Care and Maintenance
32
Activate/Deactivate/Check Status
――Cancel all barring : Cancel all restrictions on the
call.
――Change Password: You can consult your network
operator about the call
barring password.
Prompt: The above-mentioned function will have to need
network support. To use the function, please contact
your network service provider.
Call waiting: You can start up or shut down the
function. When it is started up, even
when you are
making a call, you can also receive another income
call.
Hide ID: This function must be supported by
network.
Select SIM1/SIM2
－Hide ID
－Display own ID
－Display ID by Network