User's Manual

29
¾ Only SIM2 open
Insert two SIM cards, but only SIM2 is activated and in standby.
Note: If two cards are activated, the network names are displayed in two lines with SIM1 network in first line and
SIM2 network in second line.
4.18.2 Phone settings
¾ Time and date: Set city, time and date.
------ Set home City: select a city.
------ Set time / Date: set current time and date
------ Set format: set the displaying format of time and date.
¾ Schedule Power on/off: set the time at which the mobile phone powers on/off.
¾ Language: set the displaying language of mobile phone menus.
¾ Preferred Input Methods: select a default input method.
¾ Display :
------ Idle shortcut icon: setting standby shortcut icon.
------ Wallpaper: select standby interface wallpaper.
------ Power on display: select a picture for power on.
------ Power off display: select a picture for power off.
------ Show date and Time: enable/disable displaying current time in standby interface.
------ Show operator name: select the operator name to open or close.
¾ Flight mode: set to open the flight mode.
¾ UART settings: select SIM1 or SIM2 UART.
¾ Misc. Settings
------ LCD backlight: set the brightness and time of backlight.
4.18.3 Network settings
------Network selection:
 New search: re-subscribe to newly scanned network.
 Select Network: select network for the SIM card.
 Selection Mode: select Manual or Auto.
------Preferences: Pre-store several networks.
------GPRS prefer:select Data prefer or Call prefer.
4.18.4 Data account
¾ Edit:
------ Account name: name of this account. Select Edit to modify.
------ APN: input APN.
------ User Name: account name of dial-up server (not WAP gateway).
------ Password: account password of dial-up server (not WAP gateway).
------ Auth. type: select the encrypting mode of authentication.