User's Manual
23
Bluetooth-enabled devices, but not vice versa.
• Discoverable. Bluetooth is turned on, and all other Bluetooth-enabled
devices can detect your phone.
• Off. Bluetooth is turned off. In this mode, you can neither send nor receive
information using Bluetooth.
Notes: By default, Bluetooth is turned off. If you turn it on, then turn off your
phone, Bluetooth also turns off. When you turn on your phone again, you
should turn on Bluetooth again.
Tips: Turn off Bluetooth when not in use to conserve battery power, or in
places where using a wireless device is prohibited, such as on board an aircraft
and in hospitals.
Turning on Bluetooth and making the phone discoverable
1. Tap Bluetooth Settings.
2. Select the Bluetooth check box to turn on Bluetooth. When on, the
Bluetooth icon appears in the status bar.
3. Tap Bluetooth settings, then tap Discoverable to chose how long the
phone discoverable to other Bluetooth devices that are within range, never, in
2 minutes or forever.
6.4 Data usage
This is for your use of the GPRS traffic monitoring; you can also set their
own needs.
6.5 More
6.5.1 VPN Settings
From your phone, you can add, set up, and manage virtual private networks
(VPNs) that allow you to connect and access resources inside a secured local
network, such as your corporate network.
6.5.1.1 Preparing your phone for VPN connection
Depending on the type of VPN you are using at work, you may be required
to enter your login credentials and/or install security certificates before you
can connect to your company’s local network. You can get this information
from your network administrator. Also, your phone must first establish a
Wi-Fi or data connection before you can initiate a VPN connection.
6.5.1.2 Setting up secure credential storage
If your network administrator instructs you to download and install security
certificates, you must first set up the phone’s secure credential storage.
1. Press HOME > MENU, tap Settings > Security, and then tap Set
password.
2. Enter a new password (at least 8 characters without any spaces) for the
credential storage, scroll down and confirm the password, and then tap OK.
3. Select the Use secure credentials check box.
You can then download and install the certificates needed to access your
local network, your network administrator can tell you how to do this.
6.5.1.3 Adding a VPN connection