User's Manual

24
In the poor signal areas, the phone
has to consume more power to
search the base station. It shortens
the standby time.
Move to the areas of good signal or
turn off the phone temporarily.
The phone can
be turned on.
The battery is out of power. Check the battery level or charge the
battery.
SIM card is damaged. Contact your network service
provider.
SIM card is not well inserted. Ensure SIM card is well inserted.
SIM Card Error
There is filth on the metal area of
SIM card.
Wipe the metal area with a clean
cloth.
SIM card is invalid. Contact your network service
provider.
Out of GSM service areas Consult the network service provider
about the service areas.
The phone can
connect to
w
ork.
Poor signal Move to the areas of good signal.
Call Barring is activated. Inactivate Call Barring. The phone can
make calls.
Fixed Dial is activated. Inactivate Fixed Dial.
Incorrect PIN
d
e
Enter an incorrect PIN code 3 times
in a row
Contact your network service
provider.
The battery or charger is damaged. Change for a new battery or charger.
The temperature of charging
environment is below -10°C or
above 55°C.
Change the charging environment.
The phone can
be charged.
Bad contact Check the connection of the
connector.
New entries can
be added to the
nebook.
The phonebook is full. Delete some entries of the
phonebook.
Some functions
not be set.
The network service provider does
not provide this service or you do
not apply for this service.
Contact your network service
provider.
FCC Caution
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.