User's Manual
20
time and date through left and right keys.
Schedule Power On/Off
You can set four different time intervals to edit and define the automatic switch on/off
of the phone.
Language
Your phone can support languages: English,etc.
Preferred Input Methods
You can preset the word-entering methods for text.
Display
Wallpaper: Select interface standby wallpaper
Screen Saver: The main standby screen interface selection screen image or
animation, and set the wait time
Power On Display: Choose the opening animation.
Power Off Display: Choose the closing animation.
Show date and time: Choose to open or close the idle interface shows the
current time.
Greeting Text: you can set the greeting words when it powered on. Choose
<close> to un-display.
Speed dial: The number keys can be set directly by dialin.
Dedicated key: Set navigation shortcut keys function.
Flight mode: When you choose this mode, your phones GSM module
will be stopped using
Charging Complete: you can set ring for charging completed.
3.13.2 Dual SIM settings
SIM 1 open: Only open SIM 1
SIM 2 open: Only open SIM 2
3.13.3 Network settings
Network selection: Select of manual or automatic network selection
Preferences : The first choice
Band selection: Research the network which belong SIM card.
3.13.4 Security settings
SIM lock
You may set for your phone security options in this menu to avoid unauthorized
use of phone of SIM card, and PIN code may serve the purpose.
If currently the PIN code is disenabled, select Enable to actuate PIN code
protection, and the PIN code will be demanded in the next power-on, if this code is
currently enabled, select Disenable to cancel PIN code , or Change PIN number to set
a new one, please follow the prompt to input old PIN code, new and repeat new.
Notice: Upon three incorrect inputs of PIN code in a row , the SIM card will
be locked up, by then, you need to input PUK code to unlock the SIM card, both
codes might have been provided along with the SIM card to you, if not, please
contact your network operator. The PIN code default is normally 1234, please