i3200 Pro User’s Manual 1
TABLE OF CONTENT 1 BASIC INFORMATION.................... 1 1.1 BRIEF INTRODUCTION........................................... 1 2 BEFORE USE ..................................... 2 2.1 2.2 2.3 2.4 NAME AND EXPLANATION OF EACH PART ............. 2 2.1.1 Appearance Sketch Map ........................... 2 2.1.2 Description of the Standby Pictures.......... 2 INSTALL SIM CARD AND MEMORY CARD ............. 3 2.2.1 SIM Card................................................... 3 2.2.
.2 DIAL A CALL ....................................................... 10 3.3 REJECT A CALL ................................................... 11 3.4 RECEIVE A CALL ................................................. 11 3.5 END A CALL ........................................................ 11 3.6 EMERGENCY SERVICES ....................................... 11 3.7 EXTENSION SPEED DIAL ..................................... 12 3.8 DIALED CALLS/MISSED CALLS/RECEIVED CALLS/REJECTED CALLS .........................
.2.6 Others...................................................... 16 4.3 CALL CENTER .................................................. 16 4.3.1 Missed calls............................................. 16 4.3.2 Dialed calls.............................................. 16 4.3.3 Received calls ......................................... 17 CALL WAITING: YOU CAN START UP OR SHUT DOWN THE FUNCTION. WHEN IT IS STARTED UP, EVEN WHEN YOU ARE MAKING A CALL, YOU CAN ALSO RECEIVE ANOTHER INCOME CALL. .............
4.4 ADVANCED SETTINGS ......................................... 20 MESSAGING ........................................................ 21 4.4.1 Write Message ........................................ 21 4.4.2 Inbox ....................................................... 21 4.4.3 Drafts....................................................... 22 4.4.4 Outbox..................................................... 22 4.4.5 Sentbox ................................................... 23 4.4.6 SMS Settings..........
4.9 4.8.3 Phone settings ......................................... 31 4.8.4 Network settings ..................................... 31 4.8.5 Security settings ...................................... 32 4.8.6 Restore factory settings: You can restore part of the phone settings as factory settings. The default code of restoring factory settings is: 1234. .............................................. 33 TOOLS ................................................................. 33 4.9.1 Bluetooth..................
1 1.1 Basic Information Brief Introduction Thanks for selecting I3200 PRO color screen GSM digital mobile phone. Through reading the manual, you can fully know how to use I3200 PRO mobile phone, appreciate its complete function and simple operating method. I3200 PRO color screen mobile phone is designed aiming at GSM network environment; the phone is Two Card Two Standby, but you can not call another SIM card when one SIM card is under phone call.
The company reserves the rights to revise the contents of the manual without prior notice. 2 2.1 2.1.1 Before Use Name and Explanation of Each Part Appearance Sketch Map The picture is only for your reference. 2.1.2 Description of the Standby Pictures Network signal strength The more the stripe is, the stronger the signal is. When SIM card 1s inserted in card slot 1, standby screen will show the icon. Network signal strength The more the stripe is, the stronger the signal is.
screen will show the icon. Battery strength The full the fill is, the more electric quantity is. Standby screen will show the icon. Silent mode When scene mode is set as mute mode, standby screen will show the icon. Meeting mode When scene mode is set as Vibration mode , standby screen will show the icon. Outdoor mode When scene mode is set as outdoor mode, standby screen will show the icon. 2.2 2.2.
recorded in the chip of SIM card, also the names, telephone numbers and SMS that storing in the name card holder of SIM card. You can take out SIM card from your phone, and use it in any GSM mobile phone (new mobile phone can read SIM card automatically). In order to avoid losing or damaging the information saves in SIM card, please don’t touch the metal contact surface, and place SIM card in the place that away from electricity and magnetic force. Once SIM card is damaged, you can’t use the phone normally.
the phone, the other SIM card is also inserted in this way. When taking out SIM card, directly pull it outward and then can take out SIM card. Prompt: Without special explanation inserting two SIM cards are defaulted in the manual. If you just insert one SIM card, maybe some options of the menu will not be shown. 2.2.3 Memory Card Aim at the T card slot and push the T card gently, and the card will be inserted correctly.
then press the other end to install the battery. Prompt: Please operate correctly to avoid damaging the battery connector. Do not place the battery in fire ; follow local laws and ordinances in Disposing used battery. Check the model number of the charger before using it to charge the mobile. Only use approved battery , charger and accessories applicable to the specific mobile model .
After inserting the charging plug, battery strength icon stripe at the top right corner of the screen is scrolling, which means that the charging is processing; when the stripe is full of the whole icon and stop scrolling, which means that the battery charging is completed; when the charging is completed, please pull out the plug. When electric quantity is not enough, warning message will be sent; and electric quantity shows empty. When electric quantity is too low, the phone will power off automatically.
You need to input PIN2 when entering some functions (such as call charge); if you input wrong PIN2 for continuous three times, you need to input PUK2 to unlock it. Please contact with network operations company for more details. PUK When changing the locked PIN, you need to input PUK (Personal Unlock Key). PUK is provided with SIM card together. If it is not provided, please contact with your service provider. If you input wrong PUK for continuous ten times, the SIM card can’t be used again.
3 3.1 Quick User Guide Feature Functions The phone has not only the basic functions of mobile phone, but also support rich, practical and rapid feature functions, can be briefly introduced as follows: Contacts: Each name card holder record stored in the phone can be related with several telephone numbers at most, the phone can store 100 records at most; can send SMS in the name card holder; you can copy name card holder record between SIM card and the phone.
3.2 numbers in the call log. Message: The phone supports the storing status of SMS in SIM card and the phone. Multimedia: Your phone provides all kinds of entertainment services including player, camera, FM radio and other functions. Camera: The phone supports camera and video function. You can customize the camera and video, and switch between prepositive and postpositive video captures through menu option. Organizer: The phone supports various practical functions.
number to dial phone number. When you finish inputting phone number, press the dial key to make a call. If you're making a long distance call, add the area code preceding the telephone number. 3.3 Reject a Call You can press End key to reject an incoming call. 3.4 Receive a Call When an incoming call arrives, the phone will give out the corresponding prompt (such as vibration, ringtone, and etc.
consult your network operations company for more details. 3.7 Extension Speed Dial After inputting telephone number, if you want to input branch number, please press and hold “*”, input your extension number after the display screen shows “P”. After getting through the call, it will directly dial the extension. 3.8 Dialed Calls/Missed Calls/Received Calls/Rejected Calls You can enter call log to check the relevant details of dialed calls, missed calls, received calls and rejected calls.
3.10 Call Waiting After call waiting function is started, when you are calling, the other call can be put through. 3.11 Call Barring After call barring function is started, according to different restricted conditions settings (all the dialed calls, all the incoming calls, incoming calls when roaming, dialed international calls, outgoing international calls when roaming), you can restrict the call under the corresponding conditions (need to apply to network operator for business). 3.
4 4.1 Function Menu File manager You can check the specific content and service condition of the SD memory via this function. Meanwhile. Choose one folder and press left soft key, then you can operate as follows: 1. New folder: Create a new folder. 2. Delete: Delete the folder. 3. Rename：Rename the folder Prompt: There is no own memory capacity in the phone. 4.
Prompt: Take the records in SIM card 1 for example. 4.2.1 Addnewcontact Create new name card holder records to SIM card or the mobile phone. 4.2.2 SMS Send SMS message to this record. 4.2.3 Call Dial this record directly or by means of call. 4.2.4 Delete Delete this record.
4.2.5 Copy Copy the record to SIM cards or phone. 4.2.6 Others ――Memory status: You could enquire the capacity of SIM1, SIM2 and the phone. 4.3 Call Center Display your recent call log. 4.3.1 Missed calls Display the list of your recent missed numbers. The operation is the same as the Dialed. 4.3.2 Dialed calls Display the list of your recent dialed numbers.
soft key “Option” to enter the Option interface and you could go on the following operations. View: Display the information of dial calls (Number, Date, Time,etc.) Call: Recall the number. Send SMS: You could send message to this number. Save to phone book: Add this number to the name card holder. Delete: Delete this record. 4.3.3 Received calls Display the list of your recent answered numbers. The operation is the same as the Dialed. 4.3.
Call waiting: You can start up or shut down the function. When it is started up, even when you are making a call, you can also receive another income call. Call divert: When “call divert” function is started up, you can transfer the incoming call to voice inbox or other phone number according to the scheduled “ call divert” conditions. ――Call forwarding unconditional: All incoming calls will be transferred to voice inbox or other phone number according to the setup.
――Divert If Unreachable: When your phone is power off or out of the service area, the incoming calls will be transferred to voice inbox or other phone number according to the setup. ――Cancel All Diverts: You can delete all settings of call divert. Call barred: All outgoing calls, incoming calls, roaming incoming calls, international outgoing calls, roaming international outgoing calls are available.
operator about the call barring password. Prompt: The above-mentioned function will have to need network support. To use the function, please contact your network service provider. Lines switching: There are two lines can be selected: line 1 and line 2. But the function just for the phone which has one SIM card and two numbers. If your phone is not the type like that, please just select line 1, because if you choose line 2, dialing will be limited.
4.4 4.4.1 Messaging Write Message You could write message by using this function. When you input the message to be sent, press left soft key to send, to add contact person information and symbol, and to save, etc. --Send to: Enter the interface of input number, you can input the phone number directly, or choose Add from Phone book to enter the name card holder and choose the number to send. --Advanced: you can insert number or name to the message. --Save: Save this message to the drafts. 4.4.
Press OK key directly you can read this SMS. ――Reply: You could choose to reply the addresser by SMS. ――Delete: Delete this message. ――Call: Call the addresser. ――Delete all: Delete all the messages of the inbox 4.4.3 Drafts Store the SMS you’ve edited. The SMS could be differentiated by different icons. The two icons before the message list means whether this message is SMS, and it is stored in SIM1, SIM2 or the phone.
delete, lock, mark, sort, and so on. 4.4.5 Sentbox Store the SMS you’ve sent successfully. The SMS could be differentiated by different icons. The two icons before the message list means whether this message is SMS, and it is stored in SIM1, SIM2 or the phone. Choose one SMS and press left soft key, you could delete, forward, lock, mark, sort, and so on. 4.4.6 SMS Settings There are seven options: SIM 1 service center, SIM2 service center, Delivery report , Reply path, Voicemail server, etc..
4.5 Multimedia 4.5.1 Camera The device is equipped with a webcam with high pixels. You can take photo at any time and save the photo in SD card. The photo can be used as wallpaper of your device or you can send it to your friends through Bluetooth. You can view the photo on screen and press camera key to get a picture.
balance, incandescent lamp, fluorescent lamp, daylight and cloud. Prompt: Observe photographing related local laws and regulations. Do not use the function in illegal way. 4.5.2 Image viewer Enter the images list interface, press left soft key, you could go on the following operations. --view: look the images really --Send: send this file to Bluetooth. --Delete: delete this image. --Set image as wallpaper: set this image as wallpaper --Rename: rename the file --Details: to show the images details. 4.5.
video\normal\good\high 4.5.4 Video Player This phone supports the video format of 3GP and MP4. Enter the video play list interface, press left soft key, you could go on the following operations. --Play: to ply the video files. --Send: send this file to Bluetooth. --Rename: rename the file --Delete: delete this image. 4.5.5 Audio Player This phone could play the MP3 stored in SD card and support the background play.
Under the MP3 list interface, press left soft key, then you can do operations as follows: --Play: to ply the audio files. --Details: to show the audio details. --remove: delete this audio from the list --settings: repeat\shuffle\background play Prompt: In the main interface of “Play MP3’ press hang-up key to return, the background broadcasting status will remain and the standby interface will display the name of the music played in circulation. 4.4.
4.5.7 FM Radio You can listen to Fm radio freely. Enter the radio interface, search the frequency automatically by pressing the up and down direction keys, and change previous or next channel by pressing the left and right direction keys。 On the interface of the Radio playing, press left soft key you could enter the options menu and do operations as follows: -- Channel list: You can view all the broadcasting stations you saved. --Manual search: Search the broadcasting station by input frequency manually.
brand increment service. This function isn’t available if it is beyond SIM card and network supplier’s support. So please contact network supplier to get more. 4.7 Organizer 4.7.1 Calendar You can use this feature to view the year, date and solar term easily. Use up/down/left/right direction key to navigator other date. ――Jump to Date: Enter the Solar calendar and it can go to the date you want to check. ――Go to today ――Go to weekly view 4.7.
alert at a time you specify. －Alarm1 －Alarm2 －Alarm3 4.8 Settings You can customize the settings, such as time and date, language, call settings etc. 4.8.1 Profiles You could set different scene modes. ——General ——Silent ——Meeting ——Outdoor You could active, customize or rename. 4.8.
4.8.3 Phone settings Select Language: You can select phone language. Display: Wallpaper settings: You can set as default wallpaper image as well as more other wallpaper images. Screen auto lock: You can set the time to auto lock phone Show date and time: You can turn on/turn off the display of the date and time Misc.settings LCD backlight: On the screen backlight interface you can set different lightness of your phone by pressing the left/right direction key. 4.8.
4.8.5 Security settings ――PIN You can start up, shut down or modify PIN code. Correct PIN code shall be input when you unlock or shut down PIN code. If PIN code verification is started up, each time when you switch on your phone, you will have to input PIN code. If you input mistaken PIN codes three times in a row, SIM card will be locked. You will have to get PUK1 code to unlock it. Please contact network operator to get PUK1 code when necessary. ――PIN2 You can review PIN2 code.
4.8.6 Restore factory settings: You can restore part of the phone settings as factory settings. The default code of restoring factory settings is: 1234. 4.9 4.9.1 tools Bluetooth Open/Close Bluetooth You can choose to “open” or “close” Bluetooth. Bluetooth visibility You can choose “show phone” or “hidden” Bluetooth. If the Bluetooth is hidden, others cannot search your phone.
Bluetooth earphone.). My Bluetooth name You can change the name of the phone. 4.9.2 Calculator The function will make your device a calculator with which you can carry out simple math calculation. Write by stylus to enter the numbers. Use following direction keys to calculate： Up, down, left, right key: ＋、－、×、/ OK key: Show the calculation result.
6 Care and Maintenance Maintenance of battery ·Your device is powered by a rechargeable battery. It is necessary to have the battery charged when it is going to wear out. The full performance of a new battery is achieved only when it is fully wore out. ·Unplug the charger from the electrical plug and the device when not in use. Do not leave fully a charged battery connected to a charger over a week, since overcharging may shorten its lifetime.
·Do not dispose of batteries in a fire as they may explode. Dispose of batteries according to local regulations. Care of maintenance of your device The suggestions below will help you protect your warranty coverage. ·Keep the device and accessories out of the reach of small children. ·Keep the device dry. All types of liquids or moisture will corrode electronic circuits. · Do not store the device in hot areas. High temperatures can shorten the life of electronic devices and warp or melt certain plastics.
When using any body worn accessory, please help to make sure it as least 1.5cm clearance between phone and human body. The body worn accessory should not contain any metal. 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.
1.6W/kg. Transmitting at its highest certified power level in all Your mobile phone is a radio transmitter and receiver. It is at the highest certified power level, the well below the maximum value. The maximum sum of reported SAR values for GSM, and BT is 1.476W/kg (1g) This is power levels so as to use only the power required to reach the network.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
