User's Manual

z When a charger is not in use, disconnect it from the power source. Do not leave the battery connected a

charger for longer than 12 hours, since overcharging may shorten its life.

Tips for Battery

z Do not disassemble or modify the battery by yourself.

z Do not short-circuit the battery.

z Do not dispose of batteries in fire.

z If you smell anything strange from the battery or find that the battery is overheated, you should stop using it

immediately and contact the authorized Service Center in your re

ion.

2. Getting Started

2.1.1. Installing and uninstalling SIM card

Switch off the phone; remove the back cover, battery and other external power source. Fit the SIM card into the SIM

card slot.

2.1.2. Charging the battery

Plug the charger into the socket on the side of your phone. Connect the charger to an AC wall socket. The blinking of the

battery level icon indicates the battery is being charged. When the blinking stops, it indicates the charging is finished

During charging, the phone and charger will feel warm to the touch. This is normal.

Warning:

¾ The operating ambient temperature of the charger is 0°C-50°C. Do not use it when the temperature exceeds this

limit.

¾ Use only chargers approved by the phone manufacturer to ensure safety. Failing to comply with this will violate the

terms and conditions of the warranty.

2.2. Connecting to the Network

2.2.1. SIM card

Please insert available Subscriber Identity Module (SIM) card into your phone before using it. SIM card is supplied by

your network carrier. All the information related to network connection is recorded on the SIM card, so are the contact

information such as names, phone numbers and SMS that you set to store on the SIM. You can take out the SIM card

from the phone and insert it into another GSM phone to use it. Most new phones will recognize the SIM card

automatically.

2.2.2. Connecting to the network

After the SIM card is unlocked, you phone will automatically search for the registered network or other local available

network. Once connected, the name of the network carrier will appear on the top of the screen.

You phone is now in Standby mode, ready for making and receiving call

Main menu