User's Manual
10
1.1.2.1 Answering an incoming call
Slide across the screen to answer incoming call.
1.1.2.2 Rejecting an incoming call
Slide the end call to reject.
1.1.2.3 Muting the ringing sound
To mute the ring without rejecting the call, press the VOLUME UP / VOLUME
DOWN button or Power button. You can also mute the ring with press Menu and then
tap Mute.
1.1.3 Using In-call Options
When a call is in progress, you can go through the operation of key options. Tap
the available buttons to put a call on hold, dial another contact for a phone conference,
mute the phone microphone, and more.
Note: When the phone is dialing, only the End call and Speaker on buttons are
available.
1.1.3.1 Muting the microphone during a call
Tap Mute to switch between turning the microphone on or off. When the
microphone is turned off, the Mute icon appears in the status bar.
1.1.3.2 Putting a call on hold
Tap Hold to put the call on hold. When you put a call on hold, the hold call icon
appears in the status bar. Then tap Unhold to resume the call.
1.1.3.3 Turning the speakerphone on or off
When you are on a call, tap Speaker to toggle between turning the speakerphone on
or off. The speakerphone icon appears in the status bar when the speakerphone is on.
Warning! To avoid damage to your hearing, do not hold your phone against your ear
when the loudspeaker is turned on.
1.1.4 Ending a call
Do one of the following to end the call:
• Tap End call.
• If you are using the provided wired headset, press and hold the button to end the
call.
1.2 Using Call Log
When you miss a call, the missed call icon appears in the title bar. Use the Call
log tab of the Contacts screen to check who the caller was or view all your dialed
numbers and received calls.
1.2.1 Using the Call log tab
Enter the dial number and slide to the right to the call log.
At the Call log tab, you can do one of the following:
1. Tap the name or number in the list to have a call.
2. Tap a name or number in the list to display the options menu where you can
select to view the contact information (if the number is stored in your contacts list),
edit number before call, send text message, or remove from call log.