Safety Information

01 02 03 04 05 06

07 08 09 10 11 12

13 14 15 16 17 18

19 20 21 22 23 24

25 26 27 28 29 30

STEP 3: Test the Shock Function

To ensure the shock function works properly before using the collar on

your dog, it is recommended that you should test the shock function at

least once before use. Please follow below instructions on how to use the

test light to test.

1.Turn the Receiver Collar on.

2.Place the Test Light Contacts over the Contact Points.

3.Press a shock button on the Remote Transmitter.

4.The Test Light will ﬂash.

5.Turn the Receiver Collar off.

Save the Test Light for future testing. Note: If the Test Light does not

ﬂash, recharge the battery and re-test.