Safety Information

01 02 03 04 05 06
07 08 09 10 11
12
13 14 15 16 17 18
19 20 21 22 23 24
25 26 27 28 29 30
Key Definitions
Remote Transmitter: Transmits the signal to the Receiver Collar. It is
waterproof.
Digital Display
Dog 1: The active collar symbol will display to indicate Dog 1. Dog 1 and
Dog 2 symbols will be displayed and switched (additional purchase
required for 2 dog system).
Operation Lock: When the remote is ready to power off, the lock sign will
show up on the screen momentarily, indicating power off mode.
STEP 2: Prepare the Receiver Collar
Charge the Receiver Collar
1.Lift the rubber cover protecting the Receiver Collar Charging Jack.
2.Connect the charger connector to the Receiver Collar Charging Jack.
3.Plug the charger into a standard wall outlet.
4.Charge the Receiver Collar, the red LED light will blink, charge until the
Green Indicator Light comes on and is solid, indicating a full charge.
To Turn the Receiver Collar On
1.Press and hold the Power button until the Blue LED comes on and the
Receiver Collar emits two short Beeps.
2.Release the Power button. The Blue LED will stay on blinking, meaning
the Receiver Collar is in working mode.
To Turn the Receiver Collar Off
1.Press and hold the Power button until the Blue LED comes off and the
Receiver Collar emits one long Beep.
2.Release the Power button. To extend the life between charging cycles,
turn the Receiver Collar off when it is not in use.
Level of Shock: Shows Dog 1 or Dog 2 level of Shock (Low-1 to High-10).
Level of Vibration: Shows Dog 1 or Dog 2 level of Vibration (Low-1 to
High-5).
Remote Battery Indicator: The battery indicator provides constant
awareness of the remote battery’s power level.
Receiver Battery Indicator: The battery indicator provides constant
awareness of the receiver battery’s power level.
Button Definitions (factory default settings for Dog 1 mode)