Owner's Manual
Table Of Contents
- Quick Start Guide
- User Guide
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Features
- Setting Up
- installation
- Connecting to Your Wi-Fi Network
- Registering Online
- Setting Time and Day
- Setting the Fan
- Selecting System Mode
- Adjusting Program Schedules
- Overriding Schedules Temporarily
- Overriding Schedules Permanently
- unregistering the Thermostat
- Disconnecting Wi-Fi
- Software Updates
- Smart Response Technology
- Compressor Protection
- Auto Changeover
- Setting Functions and Options
- System Setup
- FAQs
- Troubleshooting
- Glossary
- Thermostat ID Card
- Quick Reference Card
- Wiring Labels
- Warranty
C
C
Blank
sticky
tag
Terminal
designation
1.3 Label wires
Do not label by wire color.
Use the supplied sticky tags to label
each wire as you disconnect it. Label
wires according to old thermostat
terminal designations, not by wire
color.
Note: If no tag matches a terminal
designation, write the appropriate
letter on a blank sticky tag.
1.4 Remove wallplate
Remove the old wallplate from
the wall after all wires are
labeled and disconnected.
Sticky
tag