Owner's Manual
Table Of Contents
- Quick Start Guide
- User Guide
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Features
- Setting Up
- installation
- Connecting to Your Wi-Fi Network
- Registering Online
- Setting Time and Day
- Setting the Fan
- Selecting System Mode
- Adjusting Program Schedules
- Overriding Schedules Temporarily
- Overriding Schedules Permanently
- unregistering the Thermostat
- Disconnecting Wi-Fi
- Software Updates
- Smart Response Technology
- Compressor Protection
- Auto Changeover
- Setting Functions and Options
- System Setup
- FAQs
- Troubleshooting
- Glossary
- Thermostat ID Card
- Quick Reference Card
- Wiring Labels
- Warranty
9 69-2715EF—07
Installing your thermostat
11 Set clock to current day and time.
11a Press
V or W to set clock.
11b Press
Set Day.
11c Press
V or W to select the
day of week.
11d Press
Done to save.
(Press and hold a VW button to
quickly change a setting.)
MCR33908
HOLD
MCR33909
HOLD
12 Determine your heating/cooling system type.
Important! Heating/cooling system type must be set so that your
thermostat operates properly and does not damage your system.
12a If your system type is conventional single stage (natural gas-powered single
stage with a/c), continue to “Connecting to your Wi-Fi network” on page 10.
12b If your system is:
• Conventional multistage heat and cool
• Any type of heat pump
• Hydronic
• Other
You MUST change the system type by setting system function 1. See page 18 to
match your thermostat to your system type.
If you are not sure of your
heating/cooling system type
or have other questions, go
to wifithermostat.com/support
Heating/cooling system not turning
on? Refer to page 20 or FAQ at
wifithermostat.com/support
Congratulations! Your thermostat is operational.
13 Test your thermostat
13a Press the
System
button to change to
heating or cooling and begin operation.
13b For remote access to your thermostat,
continue to
“Connecting to your Wi-Fi
network” on page 10.
MCR33880