Owner's Manual
Table Of Contents
- Quick Start Guide
- User Guide
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Introduction
- Features
- Setting Up
- installation
- Connecting to Your Wi-Fi Network
- Registering Online
- Setting Time and Day
- Setting the Fan
- Selecting System Mode
- Adjusting Program Schedules
- Overriding Schedules Temporarily
- Overriding Schedules Permanently
- unregistering the Thermostat
- Disconnecting Wi-Fi
- Software Updates
- Smart Response Technology
- Compressor Protection
- Auto Changeover
- Setting Functions and Options
- System Setup
- FAQs
- Troubleshooting
- Glossary
- Thermostat ID Card
- Quick Reference Card
- Wiring Labels
- Warranty
3 69-2715EF—07
Setting up your thermostat
Setting up your Wi-Fi programmable thermostat is easy. It is preprogrammed and ready to
go as soon as it is installed and registered.
Install your thermostat.
Connect your home Wi-Fi network.
Register online for remote access.
Before you begin, you may want to watch a brief installation video. Use
the QR Code
®
at the front of this guide, or go to wifithermostat.com/support
2
3
1
Installing your thermostat
You might need the following tools to install this thermostat:
• No. 2 Phillips screwdriver
• Small pocket screwdriver
• Pencil
• Level (optional)
• Drill and bits (3/16” for drywall,
7/32” for plaster) (optional)
• Hammer (optional)
• Electrical tape (optional)
1 Switch OFF power to your
heating/cooling system.
Important! To protect your equipment,
switch OFF the power to your heating/
cooling system at the breaker box or
the system switch.
or
Circuit breaker
box
Heating/cooling
system power
switch