EIM Installation Guide 2012

NOTE: If the “Connected” light does NOT flash green, another system may be in

the listening mode. Please exit the listening mode at the other system and then

try again.

• GreenFlashing:InListeningMode-systemisreadytoaddRedLINK

devices.

• GreenSteady:RedLINKdevicesarecommunicating.

• Red:RedLINKdevice(s)areNOTcommunicating.CheckEIMandRedLINK

devices.

4.2b While the “Connected” light is flashing green on the EIM, press NEXT on

the thermostat. After a short delay, the screen will show the thermostat

is connected.

4.3 When you see the prompt Do you have RedLINK accessories to

connect? Touch YES or NO.

• If you select YES, you will be prompted to Press Connect on all new

accessories. Continue to Step 4.4.

• If you select NO, continue to Step 4.5.

4.4 Connect each RedLINK accessory.

NOTE: Make sure accessories are at least 2 feet away from the EIM during the

linking process.

4.4a While the Add Device screen is displayed (listening mode), press

and quickly release the CONNECT button on each new RedLINK

accessory.

MCR34058