VisionPRO Product Manual

VISIONPRO
®
8000 WITH REDLINK™
69 68-0312—02
Temporary Boost: Touch  or  to select how long to run
ventilation temporarily. To turn it off, set it to zero.
Fig. 131.
Lockout: To u ch  or  to select Yes or No, then touch Next.
Select Yes to prevent ventilation from running during the Sleep
or Unoccupied (commercial) program periods or when outdoor
conditions exceed values set by the installer.
Fig. 132.
Setting Preferences
Preference menu options let you select how the thermostat
displays information or responds to certain situations.
1. Touch MENU and select Preferences.
Fig. 133.
Fig. 134.
2. Select an option and follow prompts:
• Reminders to change filters
• Fahrenheit/Celsius display
• 12/24-hour clock display
• Display Options
–Backlighting (Continuous or On Demand)
–Inactive Backlight (Backlight level while the screen is
not in use. Requires C wire and Backlighting must
be set to Continuous.)
–Screen Contrast
• Alert light options
• Scheduling options
• Adaptive recovery
• Default schedule
• Daylight saving time
Fig. 135.
3. Touch Done to save your settings. Touch Cancel to
ignore changes.
Cleaning the Thermostat Screen
When you select the Clean Screen option, the screen is locked
to prevent accidental changes to the thermostat while you
clean the screen.
1. Touch MENU.
Fig. 136.
2. Select Clean Screen. A prompt asks if you want to clean
the screen for 30 seconds.
Fig. 137.
MCR34136
Run Ventilation For
60 minutes
MCR34137
Lockout in Sleep
Period: No
MCR34100
MCR34170
Preferences
Clean Screen
MCR34139
Reminders
Fahrenheit/Celsius
MCR34100
MCR34140
Clean Screen
Security Settings