VisionPRO Product Manual

VISIONPRO
®
8000 WITH REDLINK™
68-0312—02 6
SYSTEM INSTALLATION
When Installing this Product...
1. Read these instructions carefully. Failure to follow the
instructions can damage the product or cause a hazard-
ous condition.
2. Check the ratings given in the instructions to make sure
the product is suitable for your application.
3. Installer must be a trained, experienced service
technician.
4. After completing installation, use these instructions to
verify the product operation.
Finding Your Password (Date Code)
You will need the thermostat password to:
• Add or remove RedLINK accessories
• Make changes to Installer Setup
• Perform an Installer Test
• Reset Thermostat to Factory Default Settings
The password (date code) is located on the back of the
thermostat (see Fig. 4)
Fig. 4. Finding thermostat password.
You can also find the password (date code) by pressing MENU,
selecting Dealer Information and then scrolling down to see the
Date Code.
Residential/Résidentiel 1-800-468-1502 http://yourhome.honeywell.com Commercial/Commerciale 1-888-245-1051 http://customer.honeywell.com Honeywell, Golden Valley, MN 55422
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
TH8321R1001
1
1324
Res dent a /Rés dent e 1-800-468 1502 http //you home honeywe com Commerc a /Comme c a e 1-888-245 1051 http //cu tomerhoney we com Honeywe Go den Va ey MN 55422
RoHs Compliant
Conform té RoHs
A sembled in M e ico
mblé au Mex que
TH8321R1001
1
1324
Password
(Date Code)