Technical Manual
XNX Universal Transmitter
Section 2 - Installation and Operation
86
mA Level Settings
Figure 180. mA Level Settings Screen
mA Level Settings shows the current values for mA output for
Inhibit, Warning, and Overrange output.
Figure 181. mA Output Inhibit, Warning and Overrange Screens.
Fieldbus Settings
Figure 182. Fieldbus Settings
FieldbusSettingsdisplaysthecurrentcongurationofboth
HART and Modbus. To change the settings see Fieldbus
Options. HART displays the current HART address assigned to
the transmitter.
Figure 183. HART Configuration Settings
Modbus displays the current address and communication data
rate assigned to the transmitter.
Figure 184. Modbus Conguration Display Screen
Relay Data
The Relay Menu is enabled only if the XNX transmitter is
equipped with the optional relays.
Figure 185. Relay Data Screen
Figure 186. Relay State Screens