Technical Manual

XNX Universal Transmitter
Section 2 - Installation and Operation
83
2.6.2
?
Information Menu
The Information Menu Displays the current status information for
these parmeters:
Symbol Description Symbol Description
Show Alarm/Fault Status Show Gas Data
Show Date/Time Show Range/Alarm Settings
Show Transmitter Data Show mA Level Settings
?
Show Transmitter Status Show Relay Settings
Show Sensor Data Show Fieldbus Settings
?
Show Sensor Status
?
Show Event History
Alarm/Fault Status
Figure 163. Alarm/Fault Status Screen
Select Alarm/FaultStatustodisplaytheAlarm/FaultStatus
screen allowing faults and alarms to be reset.
Figure 164. Alarm/Fault Status Screen
The ‘ü’ will be highlighted. Select
✓
to reset all faults and alarms
generatedbythetransmitterthenreturntotheAlarm/FaultStatus
screen. Select the
✖
switchtoreturntotheAlarm/FaultStatus
screen without resetting faults or alarms.
Date & Time
Figure 165. Date/Time Screens
The Date and Time screens display the date and time in the
formats currently set on the transmitter. To set the time and date
see Set Date & Time.
Transmitter Data
Figure 166. Transmitter Data Screen
Using the switches, t he Transmitter Data displays the ID, part
number,serialnumber,andversionnumberofthermware.
Figure 167. Transmitter ID, Part Number and Serial Number Screens