Honeywell Temperature Sensor with LCD TABLE OF CONTENTS INTRODUCTION 3 PRODUCT OVERVIEW 4 BEFORE YOU BEGIN 5 BATTERY INSTALLATION 7 LOW BATTERY WARNING 7 PLACEMENT OF THE REMOTE SENSOR 7 GETTING STARTED 8 TRANSMISSION COLLISION 9 PRECAUTIONS 9 SPECIFICATIONS 10 FCC STATEMENT 11 DECLARATION OF CONFORMITY 12 STANDARD WARRANTY INFORMATION 13 (TS13C) USER MANUAL 2
INTRODUCTION PRODUCT OVERVIEW Thank you for selecting the Honeywell Temperature Sensor with LCD. This device registers, display and transmits the temperature data from the remote location to the designated main unit (receiver). FEATURES In this package you will find: • One remote sensor (transmitter) TS13C • One User Manual Please keep this manual handy as you use your new item. It contains practical step-by-step instructions, as well as technical specifications and precautions you should know.
B. BATTERY COMPARTMENT • • Holds two AA-size batteries C. RESET During an initial setup, place the main unit as close as possible to the remote sensor. • After reception is established (the remote temperature will appear on the main unit’s display), position the remote sensor • Resets all readings D. CHANNEL SWITCH • Selects the desired channel E. WALL-MOUNT RECESSED HOLE • Keeps the remote sensor on the wall F.
BATTERY INSTALLATION GETTING STARTED NOTE: Install the batteries; select the channel and temperature in C° or F° before mounting the remote sensor. After batteries are installed; remote sensor will transmit temperature readings at 45 second intervals. The main unit may take up to two minutes to receive the initial readings. • Remove the screws from the battery compartment with a small Phillips screwdriver. • Set the channel. The switch is located in the battery compartment.
• Remove the batteries from the main unit and reinstall them in the same manner. • The remote temperature appeared on the main unit’s display will show that transmission is being received successfully. TRANSMISSION COLLISION Signals from the other household devices such as wireless doorbells, home security systems, and entry control, may interfere with this product or cause temporary reception interruption. This is normal and will not affect the general performance of the product.
FCC STATEMENT DECLARATION OF CONFORMITY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference We Name: Hideki Electronics, Inc. Address: 7865 SW Mohawk, Tualatin, OR 97062 received, including interference that may cause undesired operation.
STANDARD WARRANTY INFORMATION This product is warranted from manufacturing defects for one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and repair. Note that online product registration is required to ensure valid warranty protection. To register your product, go to our Company website at: www.honeywellweatherstations.com. Click Online Product Registration under the Customer Service menu.
