User's Instructions

attenuation will be adversely effected by anything that impairs the seal of the earmuff

cushions against the head, such as thick spectacle frames, headdress, balaclavas, etc.

IMPORTANT USER INFORMATION

1 The earmuffs should be fitted, adjusted and maintained in accordance with the

instructions.

2 The earmuffs should be worn at all times in noisy surroundings

3 The earmuffs should be regularly inspected for serviceability.

4 The earmuffs can be cleaned with soap and warm water. They should not be dipped

into water.

5 Earmuffs and, in particular, cushions may deteriorate with use and should be

examined at frequent intervals for cracking and leakage. To replace ear cushions,

pull off the old ones and snap the new ones into place. To order new ear cushions,

please see hygiene kit information.

6 The fitting of hygiene covers to the cushions may affect the acoustic performance

of the earmuffs.

7 Before and after use, store in a dry, cool place. The temperature should not exceed

+50

8 This product may be adversely affected by certain chemical substances. Further

information should be sought from the manufacturer.

9 All Honeywell thermoplastic hearing protection products will remain in good

condition with regard to shelf life while the product is stored in a warehouse under

controlled conditions.

For Earmuffs: Humidity less than 80%, Temperature 0

C to 50

GETTING STARTED

Power On/Off Hold *C1 for 2s Audio Tone

Adjust hear-through

volume

Rotate dial *C5 Volume increase /decrease

DOSE MONITORING

Dose safe (0-85%) *C3 blinks green

Dose warning (85%-100%) *C3 blinks orange + Warning tone

Dose Alarm (Above 100%) *C3 blinks red + Warning tone

Reset Dose Hold *C2 for 5s

On success, *C3 double flashes green + audio

tone

HEADSET CONTROLS

C1 Power Button C5 Hear-Through Volume

C2 Dose Button C6 Battery latch

C3 Dose Status Indicator C7 Battery lid

C4 System Status Indicator C8 Microphone Covers