Users Manual Chapter 6

Thor VM3A Vehicle-Mounted Computer 123
7. Position the replacement front panel so the tab on the back of the front panel
lines up with the alignment slot on the VM3A. Be sure the two wiring connectors
are also aligned.
8. Position the replacement front panel so wiring connector on the back of the
front panel lines up with the connector on the computer.
9. Gently press the front panel into place.
10. Tighten the fourteen (14) captive M3 screws. In the order shown in the top
figure above, use a #2 Phillips bit and torque the screws to 6-7 inch pounds.
11. Reinstall the computer in the dock.
12. When the computer is placed in the powered dock, the UPS battery
automatically reconnects.
13. Press the Power button to turn on the computer.
14. The computer is ready for use.
Wiring
Connector on
Thor VM3A
Wiring
Connector on
Front Panel