Manualshelf

Users Manual Chapter 6

ManualsBrandsHoneywell ManualsAutomotiveVehicle Mount Computer
12345678910
122 Thor VM3A Vehicle-Mounted Computer
Equipment Required
The following equipment is user-supplied:
• Torque tool capable of measuring inch pounds
• #2 Phillips screwdriver bit
Replacement Procedure
1. Place the computer on a clean, well-lit surface before performing the front
panel replacement.
2. Press and hold the Power button until the options menu appears. Tap Power
Off.
3. Remove the computer from the dock.
4. Disconnect the UPS Battery.
5. Loosen the fourteen (14) captive M3 screws holding the front panel. Use a #2
Phillips bit.
6. Carefully lift the front panel away from the device.
Caution: Before replacing the Thor VM3A front panel, Disconnect the UPS
Battery.