Users Manual Chapter 6

Thor VM3A Vehicle-Mounted Computer 121
Factory Data Reset the Computer
1. Swipe up from the bottom of the Home screen to access all apps.
2. Select Settings > System > Reset Options.
3. Tap Erase all data (factory reset).
4. Tap Reset Phone.
5. If prompted, type your screen lock security pattern, PIN, or password and tap
next ( ).
6. Tap Erase Everything. A message appears informing you an Full factory reset
is being performed.
Clean the Computer
To keep the computer in good working order, you may need to clean the touch
screen. Clean the touch screen as often as needed for the environment in which
you are using the computer. The computer withstands application of the following
cleaning agents when applied to a clean soft cloth and removed immediately with a
dry soft cloth:
• Acetic acid, 10% in water
• Ethyl alcohol, 10% in water
• Mild soap solutions
1. Press the Power button to put the computer into Sleep mode.
2. Dip a clean cloth towel in the cleaning agent and wring out the excess.
3. Wipe dry.
4. Let the computer completely air dry before using again.
Maintenance - Vehicle Mounted Devices
Check the vehicle mounting hardware frequently and re-tighten if necessary.
If the vehicle mounting hardware and connections become broken, loose or
cracked, the assembly must be taken out of service and replaced. Contact Techni-
cal Assistance for help.
Replace the Front Panel
•