Users Manual Chapter 6

Thor VM3A Vehicle-Mounted Computer 117
5. Press and hold the Power button, and then tap Power off.
6. On your workstation (e.g., laptop, desktop computer), format the SD card and
create a \honeywell\autoinstall folder on the root of the card.
7. Save the upgrade file in the autoinstall folder.
8. Install the SD card, and then press the Power button.
The computer automatically runs the upgrade found in the autoinstall folder on
the card. The system update screen appears during the upgrade process. When
the upgrade is finished, the lock screen appears.
9. Once installation is complete, turn Provisioning mode Off.
About the Honeywell Upgrader
Use the Honeywell Upgrader app (HUpgrader) to check for and install OTA updates
or view the current OTA version installed on the computer.
Install OTA Updates
To use the HUpgrader to install an OTA update file downloaded from the Technical
Support Downloads Portal:
Save the OTA file (*.zip) in the following folder on the VM3A computer:
• Internal shared storage\Download
10. Tap HUpgrader to open the Honeywell Updater app.
11. Tap in the upper right corner, and then tap Select OTA from storage.
12. Select the storage location (i.e., Internal Storage) where you saved the file.