Users Manual Chapter 5

Thor VM3A Vehicle-Mounted Computer 75
Step 2. You will need the following tools for mounting the RAM:
•Sockets
• Torque wrench capable of torquing to 50 inch pounds (5.64±.56
N/m).
Note: Torque tool is not supplied by Honeywell.
Step 3. Determine the mounting position.
• The adapter bracket can be mounted in a high or low position, depending on
viewing position, as shown below.
• Additionally, the slotted U bracket allows the computer to be mounted
vertically or tilted forward or backward for best viewing angle.
Step 4. Install U Bracket to Vehicle
1. Position the bracket to allow access to the switches and ports on the bottom of
the computer. Skip this step if installing a U Bracket mount adapter bracket.
For these bolts... Torque to
1/4-20x5/8 Bolts 50 in/lb (5.6 N/m)
M5x16mm Bolts 35 in/lb (4.0 N/m)
1/4 Bolts (user supplied) 50.0±5 in/lb (5.64±.56 N/m)