Users Manual Chapter 5

74 Thor VM3A Vehicle-Mounted Computer
3. Slip the RAM arm over the accessory RAM ball.
4. Slip the RAM ball on the scanner holder into the RAM arm.
5. Tighten the knob on the RAM arm while adjusting to the desired angle.
Install U Bracket Mount or Adapter
Note: This mounting system does not have a provision for an integrated scanner holder.
This accessory can be mounted separately, if desired. Contact Technical Assistance
for details.
Step 1. Before installation begins, verify you have the applicable vehicle mount-
ing assembly components necessary.
Note: Individual RAM mounting components are also available.
Caution: This device is intended to transmit RF energy. For protection against
RF exposure to humans and in accordance with FCC rules and
Industry Canada rules, this transmitter should be installed such that
a minimum separation distance of at least 20 cm (7.8 in.) is
maintained between the antenna and the general population. This
device is not to be co-located with other transmitters.
Mount Kit Components
Adapter Bracket with U
Bracket (For new installations
only) (VM1010BRKTKIT)
• U Bracket
• Adapter Bracket
• Hardware: screws, flat washers, and lock washers
Adapter Bracket without U
Bracket (VM1010BRACKET)
• Adapter Bracket
• Hardware: screws, flat washers, and lock washers