Users Manual Chapter 5

68 Thor VM3A Vehicle-Mounted Computer
battery when not attached to a dock. The computer can be transferred from one
dock equipped vehicle to another for easy portability. The dock provides accessory
attachment and conditioned power for the computer.
Overhead, dash, and roof support pillar mounting is via a RAM Mount or U-bracket
accessory which includes most of the hardware required for vehicle mounting.
Select Mounting Location
The VM3A should be secured to an area in the vehicle where it:
• Does not obstruct the driver's vision or safe vehicle operation.
• Will be protected from rain or inclement weather.
• Will be protected from extremely high concentrations of dust or wind-blown
debris.
• Can be easily accessed by a user seated in the driver's seat while the vehicle is
not in operation.
General Mounting Outline
The following list outlines, in a general way, the process to follow when mounting
the VM3A in a vehicle.
1. Install RAM Mount or Install U Bracket Mount or Adapter to the vehicle
2. Place Thor VM3A in the Dock.
3. Secure accessories, such as, a scanner holder, to either and integrated or
remote mounting bracket.
4. Adjust the computer to the best viewing angle.
5. Mount the 802.11 Remote Antenna, if necessary.
6. Connect power for any peripherals.
7. Connect vehicle power:
• 12-48 VDC Vehicles (10-60 VDC Direct Connection)
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Top of Lid)
• 60-144 VDC Vehicles (50-150 VDC Power Supply, Screws on Side of Lid)
• Thor VX8/Thor VX9 Adapter Cable
• VX5/VX6/VX7 Adapter Cable
8. Secure all cables in Strain Relief Cable Clamps.
The VM3A is ready for use.
Warning: Never put the computer into the vehicle mounted assembly until the
assembly is securely fastened to the vehicle.