Users Manual Chapter 5

Thor VM3A Vehicle-Mounted Computer 77
3. If the computer is not already mounted to the dock, Place Thor VM3A in the
Dock.
4. Adjust the computer to the desired viewing angle.
5. Torque the 14-20 bolts to 50 in/lbs (5.6 N/m).
Install Table Stand
When the VM3A is used in an office environment, it can be mounted in a table
stand. To use the table stand:
1. Attach the RAM ball to the RAM Metal Table Stand with the supplied bolts and
nuts.
2. If not present, attach a RAM ball to the VMXD off-vehicle dock.
3. Slide the size D RAM arm over the ball on the table mount.
4. Insert the ball on the dock into the RAM arm and tighten the knob on the RAM
arm.