Submittal Sheet

VBN THREADED CONTROL BALL VALVES AND ACTUATORS
63-2648—07 2
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number. If you have additional questions, need further
information, or would like to comment on our products or services, please write or phone:
1. Your local Honeywell Environmental and Combustion Controls Sales Office (check white pages of your phone
directory).
2. Honeywell Customer Care
1985 Douglas Drive North
Golden Valley, Minnesota 55422-4386
3. http://customer.honeywell.com or http://customer.honeywell.ca
International Sales and Service Offices in all principal cities of the world. Manufacturing in Belgium, Canada, China,
Czech Republic, Germany, Hungary, Italy, Mexico, Netherlands, United Kingdom, and United States.
SPECIFICATIONS
Valve Type: Control Ball Valve
Body Pattern: 2-way, 3-way
Connection Type: Female NPT
Controlled Fluid: Chilled or hot water with up to 50%
Glycol. Not for use with steam or fuels.
Leakage Rating: ANSI Class IV (0.01% of CV maximum)
for 3-way A port and ANSI Class III seat leakage
specification (0.1% of CV) for 3-way B port
Maximum Safe Operating Rating: 360 psi (2482 kPa)
Fluid Temperature Range: -22°F to +250°F (-30°C to
+121°F)
Materials:
Body: Brass
Ball and Stem:
Two-way: Nickel-chrome plated brass or 316 Stainless
Steel.
Three-way: Nickel-chrome plated brass.
Seat: Teflon® seals with EPDM O-rings
Flow Control Insert: Noryl®
Body Style:
2-way ball valve, straight-through flow, full or reduced
port using patented flow control insert.
3-way ball valve, A-B-AB flow, full or reduced port using
patented flow control insert.
Internal NPT connections.
Body Pressure Rating (maximum):
360 psi (2482 kPa) at 250°F (121°C).
Medium Temperature Range:
-22 to +250°F (-30 to +121°C).
Flow Characteristics:
2-way:Equal Percentage with flow control insert.
3-way: Port A to AB: Equal Percentage.
Port B to AB: Linear.
Compatible Actuators:
Minimum Torque Required:
35 lb-in. (4 Nm) up to 3 in. (.DN80)
27 lb-in. (3 Nm) up to 1-1/4 in. (.DN32)
Fail Safe: MSXX05*
Non-Fail Safe: MVN* and MNXX05*
* These actuators are available as factory installed
assemblies. See Table 1 for all available options.
Approvals/Standards:
Valves: ANSI Class IV close-off/leakage (maximum 0.01%
of CV let by)
Actuators: See literature for the given actuator.