User Guide

TStatSpec
TM
37
The events will occur in the following order: Event 4 at
8:00am, Event 3 at 11:00am, Event 1 at 1:00pm, and Event 2
at 10:00pm.The thermostat may also have un-programmed
events with the following schedule.
The events will occur in the following order: Event 1 at
8:00am, Event 2 never, Event 3 at 2:00pm, and Event 4 at
5:00pm. Event times can be equal to one another. In this
case, the second (and 3
rd
and 4
th
) events are ignored.
To unconfigure a schedule:
To unconfigure a day schedule/event:
• Select the row/cell to unconfigure the schedule from.
• Right click on the row/cell and select Delete from the right
click menu. The schedule for that row/cell is unconfigured.
• Another way to unconfigure is to select the row/cell and
select Unconfigured from the Event state options.
The screen allows the user to copy one day's schedule to
other days, one event configuration to other event.
To copy a schedule from one day/event to other:
Copying the schedule from one day/event to another can be
done in two ways:
1. Select the row/cell whose configuration is to be copied
to another cell. Use Ctrl + C key to copy the day/event's
configuration and use Ctrl + V keys to paste the selec-
tion onto the other day/event. Both the time and the
mode are copied.
2. Select the day/event and right click on the selection.
Select Copy option. Select the destination row/cell and
select Paste option from the right click menu.
Multiple rows can also be copied.
Save and Restore Schedules from a file:
Save Schedule:
This allows the user to backup a currently configured
schedule to a file, so that it can be restored later to any T7350.
Selecting this option brings up a Save As dialog where user
can specify a file name with .qss extension to save the
schedule configuration.
Restore Schedule:
This allows the user to restore the previously saved schedule
from a .qss file. When this option is selected, a warning
message is displayed:
WARNING
This will replace the currently configured
schedule. Do you wish to continue?. If user
selects to proceed, an Open dialog is invoked
where user can specify a .qss file to restore
schedule from. This operation overrides the
currently configured schedule with the restored
schedule.
Configuring Holidays page
Description:
The Holidays page allows the user to configure the list of
holidays that the selected T7350 will follow.
Procedure:
Click the T7350 thermostat controller in the workspace to
open the configuration dialog box. Choose Holidays tab, if not
already displayed.
Fig. 35. Configure Holiday Page
A T7350 holiday is configured by a start date and duration.
The start date can be a specific date or a relative day in a
month. A holiday is not specific to a particular year, so each
Event 1 Occupied 1 8:00 a.m.
Event 2 Unoccupied 1 1:00 p.m.
Event 3 Occupied 2 6:00 p.m.
Event 4 Unoccupied 2 10:00 p.m.
Event 1 Occupied 1 1:00 p.m.
Event 2 Unoccupied 1 10:00 p.m.
Event 3 Standby 1 11:00 a.m.
Event 4 Unoccupied 2 8:00 a.m.
Event 1 Occupied 1 8:00 a.m.
Event 2 Not
Programmed
Event 3 Standby 1 02:00 p.m.
Event 4 Unoccupied 2 5:00 p.m.