User Guide

TStatSpec
TM
3
INTRODUCTION
Welcome and Links
TStatSpec™ is used to configure, download, calibrate and
monitor theT7350 controllers.
Check out Honeywell on the Internet: http://
www.honeywell.com/
NOTE: Topic information is accurate at the time of release.
However, information is updated with each new
release of TStatSpec™. To obtain the latest copy of
TStatSpec™, contact your Honeywell distributor.
Features
TStatSpec™ includes the following features:
One-stop configuration
Configure T7350 controllers, download controllers, calibrate
inputs, and monitor system behavior all with one software tool.
Simple configuration
To configure T7350 controllers, select the icon in the
workspace representing the controller and fill in the dialog
boxes.
Easy scheduling
Use scheduling tables to easily configure and change
schedules based on the list of holidays.
Standard Windows operating
TStatSpec™ supports a title bar, menu bar, toolbar, status bar,
and workspace with a standard Microsoft
®
Windows
®
look
and feel. Find, create, and open configurations using the
menu bar.
User’s Guide
Click Help at any time for printable step-by-step instructions
and tips.
Backup and Restore
Click the Backup icon to instantly back up configurations.
Click the Restore icon to recall any Backed up configuration.
IMPORTANT
The user’s guide assumes the user has knowledge
of control fundamentals, theory, and types of controls
as related to building management control. The user
also needs access to engineering data such as
equipment sizing, psychometric charts, and conver-
sion formulas. To enhance understanding, some def-
initions are provided.
It is also assumed that the user has a basic knowl-
edge of building management systems and configu-
rations.
Any control recommendations in this guide are gen-
eral in nature and are not the basis for any specific
job or installation. Control systems are to be fur-
nished according to the plans and specifications pre-
pared by the consulting engineer or other specifier.
In many instances there may be more than one con-
trol solution for a given application. Professional
expertise and judgment are required for the design of
a control system.
This guide is not a substitute for control engineering
expertise and judgment. Always consult a licensed
engineer for advice on designing control systems.