User Guide

TStatSpec
TM
13
Procedure:
1. Press SHIFT + CTRL + N or choose Delete from the
Configuration menu to open the Delete Configuration
dialog box.
Fig. 15. Delete Configuration
2. Select the configuration to be deleted and click Delete.
3. TStatSpec™ pops up a message warning the user. Click
Yes to delete the selected configuration.
Replicate a Configuration
Description:
This section describes the procedure of copying one
configuration into another configuration. This feature helps the
user to create a new configuration database from an existing
database without backing up and restoring the configuration
with a different name.
Procedure:
1. Press SHIFT + CTRL + P or select Replicate from
Configuration menu. TStatSpec will pop up a dialog
asking to close the open configuration. This message
box does not appear if no configurations are open. This
menu will be enabled only when TStatSpec contains at
least one configuration in the workspace.
Fig. 16. Replicate Configuration Message
2. After clicking Yes TStatSpec™ will display the following
dialog box:
Fig. 17. Replicate Configuration
3. From the drop-down list, select the configuration name
from which the new configuration database will be repli-
cated.
4. Give a new name to the configuration in New Config
Name.
5. After clicking OK, TStatSpec will create a new configu-
ration and add to TStatSpec Workspace.
Backup a Configuration
Description:
This section describes the process for backing up a
configuration. It is a good practice to periodically back up
configuration(s) data while working and prior to exiting
TStatSpec™ so that valuable information can be restored if it
is accidentally damaged or destroyed. The configuration
backups may be stored on floppy disks, a fixed drive on your
PC, or a network drive. In case of a Novell network, the
backed up file name should only have a maximum of 8
characters.
Purpose:
To backup a configuration for failure recovery, or to copy the
configuration information into another TStatSpec™
installation.
Fields
Name Definition
Current Configurations List of current configurations
available for deletion.
Buttons
Delete Opens a message box. Click
Yes to delete the
configuration.
Close Closes the dialog box.
Help Displays help for this topic.