Install Instructions

TR21, TR22, TR23, AND TR24 WALL MODULES
Automation and Control Solutions
Honeywell International Inc. Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MN 55422 Toronto, Ontario M1V 4Z9
customer.honeywell.com
® U.S. Registered Trademark
© 2008 Honeywell International Inc.
62-0267—05 K.K. Rev. 05-08
Table 1. DIP Switch Settings and Terminal Connections.
LONWORKS® is a registered trademark of Echelon
®
Corporation.
L
ONMARK
®
and the LonMark Logo are trademarks of the LonMark Association.
Controller Model(s) TR23-TR24 DIP Switch Settings TR22-TR24 Terminal Connections
No fan switching from sensor
W7750, W7751, and W7752
Spyder: PUL, PVL
T7350: Use +/- offset knob
only!
NOTE: These switch positions are the factory
default settings for non-fan models.
Fan switching from sensor.
W7753
Spyder: PUL, PVL
Excel 600/500/100/80
• Used with TR23 and TR24
models without fan.
Excel 600/500/100/80
• Used with TR22-F5,
TR23-F3, and TR23-F5
models with fan.
Any controller noted above.
For humidity models – TR21-H
and TR23-H only!
M28128
DIP SWITCH S3
(TR23 AND TR24 ONLY.)
ON
SW1 SW2 SW3
DIP SWITCH S2
ON
SW1 SW2
DIP SWITCH
S1
ON
SW1 SW2
1
DIP SWITCH S1 FOR HUMIDITY MODELS ONLY.
1
DO NOT CHANGE THIS
SWITCH POSITION.
111109876543212
GND
SENSOR
LON +
LON -
SETPT
LED
OVERRIDE
M28133
NOT USED ON TR24
NOT USED ON TR22
M28129
ON
SW1 SW2 SW3
DIP SWITCH S2
ON
SW1 SW2
DIP SWITCH
S1
ON
SW1 SW2
1
DIP SWITCH S1 FOR HUMIDITY MODELS ONLY.
1
DO NOT CHANGE THIS
SWITCH POSITION.
DIP SWITCH S3
(TR23 and TR24 ONLY.)
111109876543212
GND
SENSOR
LON +
LON -
SETPT
LED
OVERRIDE
M28134
WIRE FAN FOR TR23-F3/F5
AND TR22-F5
NOT USED ON TR24
NOT USED ON TR22
M28130
ON
SW1 SW2 SW3
ON
SW1 SW2
DIP SWITCH
S1
ON
SW1 SW2
1
DIP SWITCH S1 FOR HUMIDITY MODELS ONLY.
1
DIP SWITCH S2
DO NOT CHANGE THIS
SWITCH POSITION.
DIP SWITCH S3
(TR23 and TR24 ONLY.)
111109876543212
GND
SENSOR
LON +
LON -
SETPT
LED
OVERRIDE
M28135
OVERRIDE RET
LED RET
NOT USED ON TR24
M28131
DIP SWITCH S3
(TR23 and TR24 ONLY.)
ON
SW1 SW2 SW3
DIP SWITCH S2
ON
SW1 SW2
DIP SWITCH
S1
ON
SW1 SW2
1
DIP SWITCH S1 FOR HUMIDITY MODELS ONLY.
1
DO NOT CHANGE THIS
SWITCH POSITION.
111109876543212
GND
SENSOR
LON +
LON -
SETPT
LED
FAN / OVERRIDE
M28136
OVERRIDE RET
LED RET
NOT USED
ON TR24
NOT USED ON TR22
M28132
0 TO 10 VDC 0 TO 5 VDC 4 TO 20 mA
DIP SWITCH S1
ON
SW1 SW2
ON
SW1 SW2
ON
SW1 SW2
111109876543212
M28137
HUM
24 VAC
REFER TO CONTROLLER SPECIFIC
WIRING ABOVE FOR TERMINAL
CONNECTIONS 1 THROUGH 10.