Install Instructions

TP970-72, TP970-74, TP9600, AND TP9630 PNEUMATIC SENSORS, HUMIDISTATS, AND THERMOSTATS
1 IN. (25 MM)
OFFSET FOR BOX
2 IN. (51 MM)
OFFSET FOR BOX
1-1/2
(38)
1-7/16 (37)
3-1/16 (78)
C3179
Fig. 11. Deep Wall Box Mounting Bracket 14001354-001
Dimensions in Inches (Millimeters).
1/2
(13)
REMOVABLE WEB
(CUT AWAY WITH
POCKET KNIFE)
3-17/32
(90)
2-5/16
(59)
C3153
Fig. 12. Wall Mounting Ring 14004458-001
Dimensions in Inches (Millimeters).
EXTENSION
PLATE
STUD-MOUNTED
STAT PLATE
(ALIGN OVER
ELECTRICAL BOX)
3-15/16
NO. 6-32 X 1/2 IN.
(100)
MOUNTING SCREW (2)
PROVIDED WITH
STUD-MOUNTED
STAT PLATE
3-15/16
(100)
1-1/16
(27)
3-1/16
3-9/16
(91)
(78)
C3933
Fig. 13. Stud-Mounted Stat Plate 14004610-001
and Extension Plate 14004656-001
Dimensions in Inches (Millimeters).
Covers
General
This section shows how to remove and replace thermostat
and humidistat covers and how to install Inserts over the
setpoint and DAY/AUTO slots at the bottom of covers. This
section also lists recommended paints for covers that can be
painted and describes painting procedures.
Cover assembly and disassembly differs between
conventional and Quick-Mount stats. On a conventional stat
the cover mounts to setscrews in the backplate, while on a
Quick-Mount stat the cover mounts to setscrews in the stat
body (Fig. 14).
CONVENTIONAL STAT
SETSCREWS
QUICK-MOUNT STAT
SETSCREWS
STAT BACKPLATE
STAT BODY
C3569
Fig. 14. Setscrew Locations for Conventional
and Quick-Mount Stats.
5
95-5597—1