Manualshelf

Install Instructions

ManualsBrandsHoneywell ManualsCommercial Thermostats & ControlsPneumatic Thermostat Direct Acting, Wall Thermostat and Beige Cover (59° to 90°F setpoint range)
31323334353637383940
TP970-72, TP970-74, TP9600, AND PNEUMATIC SENSORS, HUMIDISTATS, AND THERMOSTATS
CABLE
ASSEMBLY
PUSH BUSHING
INTO KNOCKOUT
OR
DEEP
WALL BOX
DEEP
WALL BOX
C3564
2. Place elbow end of Cable Assembly through knockout
and push Cable Assembly bushing into knockout.
or
Attach 1/2 in. TW Setscrew Connector to appropriate
knockout in box, place conduit into Connector, and
tighten Connector setscrew.
1/2 IN. EMT
CONDUIT
1/2 IN. TW
SETSCREW
CONNECTOR
TUBING
BARB
COUPLINGS
CABLE
ASSEMBLY
OR
CONDUIT
TUBING
C3565
3. Run plastic tubing through conduit, or remove protector
cap from Cable Assembly and attach plastic tubing to
Cable Assembly with 5/32 x 1/4 in. or 5/32 x 5/32 in.
Barb Couplings.
CABLE ASSEMBLY
OR CONDUIT
TAPE
DEEP
WALL BOX
C3166
4. Wrap Deep Wall Box with 2 in. Duct Tape.
95-5597—1
36