Install Instructions

TP970-72, TP970-74, TP9600, AND TP9630 PNEUMATIC SENSORS, HUMIDISTATS, AND THERMOSTATS

C3199

HAMMER

DRILL

3/16 IN.

(4.8 MM)

PLASTIC SCEW

ANCHOR (2)

MASONRY DRILL

(3/16-IN. BIT)

C3197

3. Use 3/16-in. Masonry Drill to drill 3/16-in. (4.8-mm) top

and bottom holes.

WIRE HOOK

FISH CHAIN

C4104

C4107

STAT

BACKPLATE

4. Use Fish Chain to fish tubing through center hole.

PLASTIC SCREW

ANCHOR (2)

NO. 8 SHEET

METAL SCREWS (2)

5. Knot tubing. Tap 3/4 in. Plastic Screw Anchors into top

and bottom holes. Screw No. 8 sheet metal screws

partway into Plastic Screw Anchors.

6. Unknot tubing and connect to barbs on stat backplate.

95-5597—1