Manualshelf

Install Instructions

ManualsBrandsHoneywell ManualsCommercial Thermostats & ControlsPneumatic Thermostat Direct Acting, Wall Thermostat and Beige Cover (59° to 90°F setpoint range)
31323334353637383940
TP970-72, TP970-74, TP9600, AND PNEUMATIC SENSORS, HUMIDISTATS, AND THERMOSTATS
MASONRY DRILL
HAMMER DRILL
C3191
Fig. 38. Hammer Drill and 3/16-in. or 7/8-in. Masonry Drill.
C3195
TAPE MEASURE
THERMOSTAT
MOUNTING
GUIDE TOOL
C3196
MASONRY DRILL
(7/8 -IN. BIT)
HAMMER DRILL
2. Use 7/8-in. Masonry Drill and Hammer Drill to Drill
7/8-in. (22.2-mm) center hole.
1. Measure approximate stat location on wall. Turn Tape
Measure sideways and mark center, top, and bottom
hole locations according to points on back of
Thermostat Mounting Guide Tool.
95-5597—1
32