Install Instructions

TP970-72, TP970-74, TP9600, AND TP9630 PNEUMATIC SENSORS, HUMIDISTATS, AND THERMOSTATS

TUBING

BARB

SHALLOW

COUPLINGS

WALL PLATE

TUBING AND

TWIN ELBOW

ASSEMBLY

C3948

3. Connect tubing to Tubing and Twin Elbow Assembly

with 5/32 x 1/4 in. or 5/32 x 5/32 in. Barb Couplings.

TWIN TUBE

SOFT COPPER TIE

WIRE OT PLASTIC

TUBING AND TWIN

COVERED WIRE TIE

ELBOW ASSEMBLY

SHALLOW

WALL PLATE

UPPER SCREW

RECEPTACLE

C3949

SHALLOW

WALL PLATE

BREAK-

OUT TAB

PLASTER

RING

SCREWS

PROVIDED

WITH SHALLOW

WALL PLATE

C3598

5. Remove break-out tab from top of Plaster Ring. Push

Plaster Ring onto Shallow Wall Plate brackets and

lower screw receptacle. Attach Plaster Ring to Shallow

Wall Plate with screws provided.

FITTING

FINDER

PLASTER RING

C3599

4. Remove screws from screw receptacles on Shallow 6. Snap Fitting Finder onto Plaster Ring.

Wall Plate. Push Tubing and Twin Elbow Assembly onto

upper screw receptacle. Anchor tubing to lath with Soft

Copper Tie Wire or Plastic Covered Wire Ties.

95-5597—1