Manualshelf

Install Instructions

ManualsBrandsHoneywell ManualsCommercial Thermostats & ControlsPneumatic Thermostat Direct Acting, Wall Thermostat and Beige Cover (59° to 90°F setpoint range)
11121314151617181920
TP970-72, TP970-74, TP9600, AND TP9630 PNEUMATIC SENSORS, HUMIDISTATS, AND THERMOSTATS
STANDOFF
RING IN
WALL
TUBING
STAT
BACKPLATE
C3592
6. After drywall or plaster is up, remove elbow from end of
Cable Assembly, if used. Connect tubing to barbs on
stat backplate.
STANDOFF
RING IN
WALL
STAT
BACKPLATE
KEYHOLE
SLOTS
C3586
7. Back screws out of Standoff Ring. Hook keyhole slots
of stat backplate over screws. Level stat backplate and
tighten screws.
STAT
BACKPLATE
STAT
C3579
8. Mount stat onto stat backplate.
SETSCREWS
STAT
BACKPLATE
STAT
TAB (2)
COVER
SETSCREW
SLOTS
C4117
9. Hook slots on stat cover over bottom tabs on stat
backplate. Swing stat cover up and over stat. Use
Thermostat Tool to raise stat backplate setscrews into
setscrew slots on top of cover.
19
95-5597—1