Install Instructions
TP970-72, TP970-74, TP9600, AND PNEUMATIC SENSORS, HUMIDISTATS, AND THERMOSTATS
SETSCREWS
STAT
BACKPLATE
STAT
7. Hook slots on stat cover over bottom tabs on stat
backplate. Swing stat cover up and over stat. Use
Thermostat Tool to raise stat backplate setscrews into
setscrew slots on top of cover.
C4116
TAB (2)
COVER
SETSCREW
SLOTS
MAIN
BRANCH
BARB CAP
ONE-PIPE ASSEMBLY
CABLE ASSEMBLY
BARB
COUPLINGS
FOR PLASTIC
TUBING
PROTECTOR CAP
MAIN
SWITCH
BRANCH
THREE - PIPE ASSEMBLY
BARB TEE
BUSHING
PLASTIC CABLE
ASSEMBLY 8 FT (2.5 M)
PROTECTOR CAP
FITTING
FINDER
ALIGNMENT GUIDE
FOR FINISHED WALL
NO. 6–32 X 1/2 IN. SCREW (2)
PROVIDED WITH DEEP WALL BOX
BUSHING
DEEP WALL
BOX
Mounting to Stud with Deep Wall Box
Mounting to a stud using a Deep Wall Box requires the
following equipment:
— Deep Wall Box Assembly 14001492-001 (includes two-
pipe plastic cable assembly, see Fig. 24) or separate
parts for one- and three-pipe applications as follows:
• Deep Wall Box 14001355-001
• Fitting Finder 14000706-001 (optional)
• One of the following:
14001491-001 one-pipe or -003 three-pipe Plastic
Cable Assembly
or
14001494-001 one-pipe, -002 two-pipe, or -003
three-pipe Copper Cable Assembly
— Barb Couplings CCT1606B (MJP1606B) (5/32 x 1/4 in.)
or CCT1628B (MJP1628B) (5/32 x 5/32 in.) for plastic
tubing (one, two, or three Couplings required according
to application)
— Tape Measure CCT422
— Cordless Drill CCT713 (Fig. 25)
— TEK Drill Adapter Screwdriver CCT240 (Fig. 25)
— The following items according to mounting method:
• Directly to stud:
Two No. 8 x 2 in. Pan Head Sheet Metal Screws
CCT2310 (MVH2310)
or
Two 6d 2 in. (51 mm) nails
• Between two studs:
Universal Strap CCT2630 (MVP2630) (Fig. 26)
Two No. 8 x 1/2 in. TEK Screws CCT2444
One No. 8-32 x 1/2 in. Round Head Screw CCT2410
• Offset from stud (e.g., to center over electrical box):
Deep Wall Box Mounting Bracket 14001354-001
One No. 8-32 x 1/4 in. Round Head Screw CCT2408
Two No. 8 x 1/2 in. TEK Screws CCT2444
— Thermostat Tool CCT735A (MQT735A)
Fig. 24. Deep Wall Box Assembly and Cable Assemblies.
95-5597—1
12
C3562